Berkebile Oil Products - Lubricants
Pen Lube with PTFEBERKEBILE 2+2® PEN LUBE with PTFE... is designed to penetrate those “frozen” parts and joints, and make future uses much simpler!
Directions for UseFor proper spraying, can should be at room temperature (about 72 deg. F. / 22 deg. C.). Do not get product or overspray on plastic (including polycarbonate and acrylic), rubber, elastomeric, painted, or other materials which could be damaged by perchloroethylene. Parts to be sprayed should be reasonably clean and dry. For pinpoint application or to get into hard-to-reach areas, firmly insert extension tube into hole in spray button. Hold can upright, press firmly on spray button, and apply penetrant to parts or surfaces which are “frozen”, rusted, sticking, or otherwise in need of lubrication.
For “frozen” parts: After applying product, allow it several minutes to penetrate and lubricate before trying to move parts. Tapping parts lightly with a hammer will aid penetration. Repeat application if necessary. Precautions: Contains Perchloroethylene (CAS#127-18-4); Petroleum oils (CAS#64742-52-5 and N/A mixture); and Carbon Dioxide. KEEP OUT OF REACH OF CHILDREN. Use in well-ventilated area, keep away from heat, battery terminals, and other exposed electrical circuits. Product may make walking surfaces slippery. Properly dispose of empty can in outdoor recycling or waste container and in accordance with all applicable federal, state, and local regulations. |
Packaging Information
STOCK NUMBER
- B3900 |
CONTAIN SIZE
11 oz. Aerosol |
UNITS/CASE
12 |
WT./CASE
12 lbs. |
CASE/PALLET
150 |