Berkebile Cleaners

HOME > PRODUCTS > CLEANERS > CLEAN BRAKE (NON-CHLORINATED)
Picture

CLEAN BRAKE 50-STATE FORMULA

  • Non-Chlorinated, Low VOC formula is approved for use in all 50 states
  • Removes brake fluid, oil, grease, and other contaminants
  • Cleans brake linings and parts
  • Can be used without disassembling the brake unit
  • Powerful spray that leaves no residue

Directions for Use

1)  Protect rubber brake parts and painted surfaces from overspray. 

2)  Lightly wet down all dust and surfaces to be cleaned by spraying in short bursts from a distance of about 18 to 24 inches (1/2 m) {For MIST ACTION SPRAY – Press spray actuator (nozzle) DOWN.}. 

3)  After surfaces have been wetted, continue spraying at a distance of about 12 to 18 inches (1/3 m) to flush contaminants from the surface {STREAM ACTION SPRAY – Push or tilt spray actuator (nozzle) FORWARD for strong stream.}.

4)  After spraying brake parts thoroughly, allow them to dry (or wipe them with a soft, clean cloth).  If deposits are heavy, repeat the application.

*Always use in a well-ventilated area.
​
STOCK NUMBER
- B3250
CONTAIN SIZE
15 oz. Aerosol
UNITS/CASE
12
WT./CASE
16 lbs.
CASE/PALLET
125