Brake Fluid - DOT 4 - Berkebile Oil

Berkebile Oil Products - Fluids

HOME > PRODUCTS > FLUIDS > DOT 4 BRAKE FLUID

DOT 4 Brake Fluid

BERKEBILE 2+2® DOT 4 BRAKE FLUID... meets or exceeds SAE J-1703 and Dept. of Transportation's Federal Motor Vehicle Safety Standard (FMVSS) No. 116 for DOT 3 and DOT 4 Brake Fluids. BERKEBILE 2+2® DOT 4 BRAKE FLUID is designed and exceeds all the of the above standards for disc, drum, and anti-lock braking systems (ABS). Among these requirements are standards for fluid stability, corrosion, fluidity, and appearance at low temperatures, evaporation, water tolerance, compatibility, resistance to oxidation, stroking properties, and degree of swelling, softening or disintegration of rubber.

BERKEBILE 2+2® DOT 4 BRAKE FLUID offers improved safety over conventional types of brake fluids by chemically changing accumulated water in the system. In this way, it reduces the effect of water on the boiling point of the fluid and, therefore, greatly diminishes the chance of vaporization and, consequently, brake failure due to vapor lock when the braking areas become overheated.

- HIGH PERFORMANCE FOR DRUM, DISC, AND ABS BRAKES!
- MEETS ALL SAE @ FEDERAL SPECIFICATIONS!
- HIGH DRY BOILING POINT, MINIMUM OF 480˚F!
- SUPERIOR CORROSION RESISTANCE!

PROPERTIES

Boiling point, min. (F.)
- Reflux
- Wet Reflux
Flashpoint COC (degree F.)
pH
Specific Gravity @ 15.6/15.6˚ C.
Viscosity (cs)
@ -40˚C., range.
@ 100˚C., min.
Density @ 15.6˚(lb./gal.)

BERKEBILE 2+2® DOT 4 Brake Fluid

480
330
274
8.1-9.6
1.064-1.070

1,050-1,200
1.5
8.91

Requirements

446
311
---
7.0-11.5
---

1,800
1.5
---

*Typical properties based on fluid tests immediately following manufacture.

Packaging Information

STOCK NUMBER
- B2900
- B2902

CONTAIN SIZE
12 fl. oz. Liquid
1 gal. Liquid

UNITS/CASE
12
4

WT./CASE
12 lbs.
40 lbs.