Berkebile Oil Products - Silicone Gasket Makers

HOME > PRODUCTS > SILICONE GASKET MAKERS > LOW VOLATILE/LOW ODOR SILICONE INSTANT GASKET MAKER 
Picture

Low Odor / Low Volatile 
Super Gray Silicone 
Instant Gasket Maker

BERKEBILE 2+2® LOW VOLATILE/LOW ODOR SILICONE INSTANT GASKET MAKER... is a one-part neutral cure silicone sealant cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.  It is available in both gray and blue colorings.

BERKEBILE 2+2® Low Volatile / Low Odor Silicone Instant Gasket Maker provides a long-lasting flexible seal with excellent adhesion to most surfaces.  This sealant is intended for a variety of general purpose and industrial applications and retains its elastomeric properties at temperatures from –800 to 4500 F. (-620 to 2320 C.)

BERKEBILE 2+2® Low Volatile / Low Odor Silicone Instant Gasket Maker is not recommended for use in the following applications:  do not use silicone gasket maker only when replacing head gaskets; do not use on parts continuously immersed in gasoline; glazing or edge sealing of insulated glass; structural glazing; aquariums; copper or brass (may discolor these surfaces); totally confined spaces (needs atmospheric moisture to cure); surfaces that require painting (paint will not adhere).
  • Specifically designed for automotive applications such as sealing exhaust manifolds; turbo housings; oxygen sensors; adhering auto and appliance trim; providing form-in-place gaskets for gearboxes, compressors, & pumps; sealing trailers & truck cabs; bonding & sealing appliance parts.
  • Remains uniform over a wide range of temperatures.  It may be applied in sub-zero weather without loss of extrusion or physical properties.
  • Retains its elastomeric properties at temperatures from –800 to 4500 F. and can be used for intermittent exposure at temperatures up to 6000 F. for most colors.

Typical Properties
  • Sag or Slump Nil
  • Specific Gravity:   Clear 1.03, Colors 1.43
  • Tack-free time @ 770 F., 50% RH < 1hr.
  • Curing time @ 770 F., 50% RH ¼” bead is 24 hrs.
  • Durometer hardness, Shore A 26
  • Meets GM Specification 9985985

Storage and Shelf Life:  When stored in original, unopened containers at or below 900 F. (320 C.), BERKEBILE 2+2® Low Volatile / Low Odor Silicone Instant Gasket Maker has a minimum shelf life of 12 months from the date of manufacture.

Warranty:  The Berkebile Oil Company Inc. warrants that the product delivered complies with the chemical and physical specifications designated by the Company, and no other warranty is expressed or implied, whether concerning recommendations, instructions, or products.  The liability of The Berkebile Oil Company Inc. shall not, in any case, exceed the purchase price of the product. Upon expiration of the warranty period specified herein, all such liability shall terminate. 

Directions for use:

  1. Clean & dry surfaces.  Surfaces should be free of dirt, grease, oil, and old gasket material.
  2. Remove the cap, puncture the inner seal, and screw on the extension nozzle and out the nozzle to desired bead width.
  3. Apply an approximate 1/8” unbroken bead to one surface and completely encircle all bolt holes.
  4. Assemble parts while the material is tacky (approx. 5 to 10 minutes).  Do not over-tighten bolts.  Material skins within 15 minutes.
  5. It may be applied to both sides of the gasket as a pre-cut gasket dressing.
  6. Allow curing for at least 15 minutes.  The material typically fully cures in 24 hours.
  7. Remove the nozzle and replace the cap after use.

Packaging Information

STOCK NUMBER
- B1 
CONTAIN SIZE
3.35 oz. Tube
UNITS/CASE
12
WT./CASE
5 lbs.
CASE/PALLET
200